Smart Home Group 115w Fixed Solar Panel

Smart Home Group 115w Fixed Solar Panel

Energus 160w Flexible Solar Panel

Energus 160w Flexible Solar Panel

Victron Energy Blue Solar MPPT Regulator 75/10

$119.00
SKU
Victron-Solar Reg-10A

75V/10A Version. (Model MPPT 75 | 10)

This regulator supports VE.Direct! Purchase the additional VE.Direct to Bluetooth Smart dongle to display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app.

--Available for purchase separately here if you already own a BlueSolar regulator that supports VE.Direct

Max PV Open Circuit Voltage: 75V

Battery Voltage: 12/24V

Rated charge current: 10A

Maximum PV power, 12V 1a,b): 200W

Maximum PV power, 24V 1a,b): 400W

Max. PV short circuit current 2): 10A

Protection category: IP43 (electronic components), IP22 (connection area)

Datasheet: https://www.victronenergy.com/upload/documents/Datasheet-Blue-Solar-Charge-Controller-MPPT-75-10,-75-15-&-MPPT-100-15-EN.pdf

Overview: https://www.victronenergy.com/upload/documents/Datasheet-Blue-Solar-Charge-Controller-overview-EN.pdf

Victron Energy manufactures electric power conversion products for mobile and other off-grid applications since 1975

Victron's BlueSolar range of regulators feature ultra-fast maxium power point tracking (MPPT), advanced MPPT detection in case of partial shading, intelligent battery mangement by load shedding, automatic battery voltage recognition, flexible charge algorithm, over-temperature protection and power de-rating when temperature is high.

In our MPPT model names, for example MPPT 75/10, the first number is the maximum PV open circuit voltage. The second number, 10, is the maximum charge current.

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output
will disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote
control connected to the load output. A special interface cable may be needed, please see the manual.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm

Purchase the additional VE.Direct bluetooth dongle, to allow configuration of regulator via android/iphone app.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account